Test Study on Current Force on Mooring Ships     

Zhang Furan  Zhao Jun Zhang Xueqin Assistant Researcher  Tianjin Research Institute of Water Transport Engineering  Tianjin Assistant Engineer  Tianjin Research Institute of Water Transport Engineering  Tianjin 《中国海洋工程》1993,(2)

In respect of an offshore berthing pillar, the test study result of current force acting on mooring ships is described in this paper. Empirical and semi-empirical relationships of current force coefficient are given according to the angle between the flow direction and the ship's longitudinal axis, which are coincident with the result of theoretical analysis.  相似文献   

A Computational Model for Velocity Separation in Shallow Sea   总被引：1，自引：0，他引：1  

SONG  Zhiyao 《中国海洋工程》2002,16(3):407-413

Based on the hydrodynamical feature and the theoretical velocity profiles of tidal flow and vvind-induced flow in shal-low sea, a computational model is established for the first time, which can separate observed velocity into tidal velocity and wind-induced velocity by use of the least square method. With the model, not only the surface velocities of tidal flow and vvind-induced flow are obtained, but also the bed roughness height is determined and the wind velocity above the wa-ter surface is estimated. For verification of the model, the observed velocity in the Yellow River Estuary and the laborato-ry test is separated, then it is applied to the Yangtze River Estuary. All the results are satisfactory. The research results show that the model is simple in method, feasible in process and reasonable in result. The model is a valid approach to analysis and computation of field dala, and can be applied to separate the observed velocity in shallow sea; at the same time, reasonable boundary conditions of th  相似文献   

A Nonlinear Model of Surf Beat     

Nicholas Dodd 《中国海洋工程》1995,(2)

A nonlinear short-wave-averaged (surf beat) model is presented. The model is based on that of Roelvink (1993), but the numerical techniques used in the solution are based on the so-called weighted-averaged flux (WAF) method (eg Watson et al., 1992), with time-operator splitting used for the treatment of some of the source terms. This method allows a small number of computational points to be used, and is particularly efficient in modelling breaking long waves. The short-wave (or primary-wave) energy equation is solved using a more traditional Lax-Wendroff technique. Results of validation indicate that the model performs satisfactorily in most respects.  相似文献   

Wave Loads and Protective Techniques of An On-Shore Wave Power Device     

You Yage YuZhi Associated Professor  Guangzhou Institute of Energy Conversion  Chinese Academy of Sciences  Guangzhou . Professor  Guangzhou Institute of Energy Conversion  Chinese Academy of Sciences  Guangzhou 《中国海洋工程》1995,(4)

In this paper, the extreme wave loads on an on-shore wave power device are investigated. First, boundary element method is applied to solve the three dimensional potential problem based on the small amplitude wave assumption. Then the motion of the Oscillating Water Column (OWC) inside the device and its laods on the device are calculated in time domain. Several protective techniques often applied are simulated by changing the constraint of the upper end of the chamber of the device. Numerical results are used to judge the effectiveness of these techniques. The investigation shows that damping can not effectively restrain the motion of OWC when the period of incident wave is long, which may cause dangerous loads on the structure. The shut chamber can effectively restrain the motion of OWC, but alternatively cause high pressure in the chamber. A Contracting opening with a Taper (CT) can exhaust a great amount of kinetic energy of OWC, and significantly decrease the loads. It is a promising protective tec  相似文献   

Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography     

Zhang Libang Research Engineer  First Institute of Oceanography  Qingdao 《中国海洋工程》1991,(4)

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.  相似文献   

Design of a caisson plate under wave impact     

M. Salih Kirkgz  Yalin Mengi 《Ocean Engineering》1987,14(4)

From the laboratory experiments and field studies it has been shown that when a wave breaks directly on a vertical wall, impact pressures of high magnitude and short duration, are produced. Despite the recent advances made in collecting data on impact pressure histories and their spatial distributions, analyses on the structural behaviour of the walls loaded by the impact forces do not seem adequate. In the present study the theoretical analysis of the response characteristics of a caisson plate, having different aspect ratios, under the wave impact loading is investigated. Numerical results for the dynamic values of moments and transverse displacements are obtained by the method of finite elements. Some prerequisite experimental data for wave breaking and resulting impact pressures are provided. The static results for moments and deflections are also computed for comparing them with the dynamic values. The dynamic results are found significantly greater than the static values. The ratio between the dynamic and static values is called “Dynamic magnification factor” that varies with plate aspect ratio. Based on this factor a procedure is proposed which may have practical consequences in the design of caisson plates.  相似文献   

Wave-Current Forces on Small Square Cylinders (Part I)     

Li Yucheng  He Ming Professor  Dalian University of Technology  Dalian Former master student  Dalian University of Technology  Dalian 《中国海洋工程》1994,(3)

-Based on the extended Morison Equation and model tests, the in-line forces on small square cylinders caused by waves (regular and irregular) and currents are analyzed in detail in this paper. The hydrodynamic coefficient CD and Cu related to KC number and the effect of direction of wave incidence are also given, which can be used in engineering practice.  相似文献   

Model Test of Sand Restraining Force on Pipeline     

Zhang Jianguo Yan Chi Yan Shuwang Lecturer  Dept. of Hydraulic Eng.  Tianjin University  Tianjin Associate Professor  Dept. of Hydraulic Eng.  Tianjin University  Tianjin Professor  Dept. of Hydraulic Eng.  Tianjin University  Tianjin 《中国海洋工程》1996,(1)

This paper describes the model tests for determining the axial friction and the lateral resistance of sand to pipeline by using fine sand and prototype pipeline, and the calculation method based on limit analysis theory is verified. The effect of cyclic loading is considered in the test.  相似文献   

Shear Failure of a Clamped Dented Tubular Beam Under Lateral Impact   总被引：1，自引：0，他引：1  

Wang Deyu  Zhang Shanyuan Associate Prof.  Depart  of Naval Archi.  Ocean Engineering  Shanghai Jiaotong University  Shanghai Prof.  Research Institute of Applied Mechanics  Taiyuan University of Technology  Taiyuan 《中国海洋工程》1996,(2)

- The shear failure of a rigid-plastic dented clamped tubular beam under the lateral impact of a mass is investigated. Both the denting and the impact point are in the middle span of the beam. It is assumed that denting does not spread during the shear sliding. Numerical results show that the axial force and lateral deflection of the beam are very small at the moment of the occurence of shear failure, which means that the finite deformation effect can be neglected in the shear failure analysis. Also, some aspects of the initial impact energy are investigated.  相似文献   

Dynamic Analysis of a Single-Column Platform (II)     

Lian Gan  Ni Kan  Hu Kai Guo Dawei . Professor  Senior Engineer  Marine Design & Research Institute of China  Shanghai . Senior Engineer  Marine Design & REsearch Institute of China  Shanghai . Engineer  Marine Design & Research Institute of China  Shanghai 《中国海洋工程》1992,(4)

This paper describes the study of a single-column structure used as well-head platform. In order to check the reliability of computation theory and programme, model tests have been carried out. The paper introduces the conclusion of tests and the dynamic properties of single-column platform are obtained.  相似文献